The following information may have errors; It is not permissible to be read by anyone who has ever met a lawyer. Use is confined to Engineers with more than 370 course hours of electronic engineering for theoretical studies.
All content entered becomes and is (C)2007 Transtronics, Inc. the property of Transtronics, Inc. Rest assured that your contributions won't be sold and will be publicly available.
ph +1(785) 841 3089 Email inform@xtronics
Resistor Types
From Transwiki
[edit] Resistor types
| Resistor Type | Ohm range Min | Ohm Range Max | Temp-co Min PPM | Temp-co Max PPM | Parasitics |
|---|---|---|---|---|---|
| Carbon | 1 | 22M | 400 | 1300 | low |
| Carbon Film (CF) | 10 | 10M | 500 | 800 | Mid |
| Metal Film (MF) | 10 | 1M | 25 | 1000 | mid |
| Metal Element | .0002 | 1 | 75 | 110 | ?? |
| Metal Foil | .0001 | 150k | 0.2 | 150 | ?? |
| Metal Oxide(MO) | 1 | 30M | 100 | 200 | ?? |
| Thick Film | .001 | 100G | 80 | 800 | Mid |
| Thin Film | .001 | 10M | 5 | 500 | Mid |
| Wire Wound | .005 | 50K | 20 | 600 | High |
| Diffused | ? | ? | ? | ? |
- Diffused resistors (inside an ICs) track well
- Parasitics and be of both capacitance and inductance.
- When working with high-voltage - pay attention to the rating
- Most applications de-rate the power rating by half.
- Metal oxide resistors are often good for more than 1/2 watt applications - tough and withstand transients.
[edit] Case to wattage
| Case size mils | Case Size metric | Mill Wattage | Wattage | Relative price |
|---|---|---|---|---|
| 01005 | 0402 | 0.031 | ||
| 0201 | 0603 | 0.05 | ||
| 0402 | 1005 | 0.0625 | 0.167 | 3.6 |
| 0603 | 1608 | 0.0625 | 0.1 | 2.10 |
| 0805 | 2012 | 0.100 | 0.125 | 2.50 |
| 1206* | 3216 | 0.125 | 0.250 | 3.90 |
| 1210 | 3225 | 0.250 | 0.333 | |
| 2010 | 5025 | 0.500 | 0.750 | |
| 2512 | 6432 | 1.00 | ||
| 2045 | 50??? | 1.00 | 2 |
Note - Resistors are normally de-rated by 50% for a good life span. The area of these chip resistors is the same no matter what wattage they are rated - the surface may be a different material, but the insides are still hotter if the manufacturer rates them higher. Conservative design would tell us to use the lower values. ®
