The following information may have errors; It is not permissible to be read by anyone who has ever met a lawyer. Use is confined to Engineers with more than 370 course hours of electronic engineering for theoretical studies. All content entered becomes and is (C)2007 Transtronics, Inc. the property of Transtronics, Inc. Rest assured that your contributions won't be sold and will be publicly available.
ph +1(785) 841 3089 Email inform@xtronics

From Transwiki

# Sensors configuration file used by 'libsensors' -(/etc/sensors.conf
#                                                                        #
#    PLEASE READ THIS HELPFUL HINT!!!                                    #
#                                                                        #
#       The 'set' lines (generally for min and max values)               #
#       do not take effect until you run 'sensors -s' as root !!!        #
#
# Explainations of this file are found with "man sensors.conf " or at
# the top of the stock sensors.conf file.


chip "asb100-*"
# adjust this if your vid is wrong; see doc/vid
    #set vrm 9.0

    label in0 "VCore 1"
    set in0_min vid * 0.95
    set in0_max vid * 1.05

    label in1 "VCore 2"
    ignore in1
    set in1_min vid * 0.95
    set in1_max vid * 1.05

    label in2 "+3.3V"
    set in2_min 3.3 * 0.95
    set in2_max 3.3 * 1.05

    label in3 "+5V"
    compute in3 1.68 * @ ,  @ / 1.68
    set in3_min 5.0 * 0.95
    set in3_max 5.0 * 1.05

    label in4 "+12V"
    compute in4 3.8 * @ , @ / 3.8
    set in4_min 12  * 0.90
    set in4_max 12  * 1.10

    label in5 "-12V (reserved)"
    #ignore in5
    compute in5 -@ * 3.97 ,  -@ / 3.97
    set in5_max -12 * 0.90
    set in5_min -12 * 1.10

    label in6 "-5V (reserved)"
    #ignore in6
    compute in6 -@ * 1.666 , -@ / 1.666
    set in6_max -5  * 0.95
    set in6_min -5  * 1.05

    label temp1 "M/B Temp"
    set temp1_over 45
    set temp1_hyst 40

    label temp2 "CPU Temp (Intel)"
    #ignore temp2
    set temp2_over 60
    set temp2_hyst 50

    # PWRTMP connector on P4S333, for external sensor
    label temp3 "Power Temp"
    #ignore temp3
    set temp3_over 45
    set temp3_hyst 40


    # Used for Athlon diode, ignore for P4S333
    label temp4 "CPU Temp (AMD)"
    set temp4_over 60
    set temp4_hyst 50
    #ignore temp4

    label fan1 "CPU Fan"
    set fan1_div 4
    set fan1_min 2000

    label fan2 "Chassis Fan"
    set fan2_div 2
    set fan2_min 4000

    label fan3 "Power Fan"
    set fan3_div 2
    set fan3_min 4000