The following information may have errors; It is not permissible to be read by anyone who has ever met a lawyer. Use is confined to Engineers with more than 370 course hours of electronic engineering for theoretical studies. All content entered becomes and is (C)2007 Transtronics, Inc. the property of Transtronics, Inc. Rest assured that your contributions won't be sold and will be publicly available.
ph +1(785) 841 3089 Email inform@xtronics

From Transwiki

[edit] 777 series

The RS485 communications can be used on the standard 777. The -P version allows you to program some additional features over the network such as a "high power" and "jam protection".

Pricing

The -P "Plus" - includes a network programmable HP (high power) setpoint; the TC (trip class) can be set from 2-30A for "jam protection" Network requires communications module

-P1 Network alarms - same as -P but includes high and low power alarms that are programmable via the network

-HVR "High Voltage Relay" Used to eliminate the need of a CPT(Control Power Transformer) on 480V systems. Used in the 380-480V range. Relay rated 480VA @600Vac. Commonly used in pumping applications to save the cost and extra wiring associated with a CPT.

-MV "Medium Voltage" for use with PT (Potential Transformers) and CT(Current Transformers) 115-240Vac with built in multipliers for CT of 25:5, 50:5, 100:5. Voltage unbalance, single and reverse phase protection can be disabled for use with a single PT.

-575 480-600Vac range and 240Vac relay. Often used in Canada and NE USA where 575 power is sometimes used.

-690 600-690Vac range and 240Vac relay. CE listed - but not UL targeted fro central and south America.

-KW/HP Under load trip based on power. Often used with centrifugal pumps.

-FT - "Fast Trip" as 500ms - 70s. Often used to prevent damage in overload or jam situations. Sometimes called 'shock relays'.

-LR - for "Low Range" 1-9A full load motors

-TS - for Temp Sensor Franklin submersible motors with subtrol.

-NP "No Parity" on modbus networking

-SP Sinle Phase 480Vac applications

-AccuPower for 3-phase pumping applications when the user wants to input the motor’s efficiency and is desired over the utility power. Provides a 4-20mA analog signal proportional to the output power when using a 4-20mA communications module.

FLA = Full Load Amps