The following information may have errors; It is not permissible to be read by anyone who has ever met a lawyer. Use should also be confined to Engineers with more than 370 course hours of electronic engineering and should only be used for theoretical studies. All content entered becomes and is (C)2007 Transtronics, Inc. the property of Transtronics, Inc. Rest assured that your contributions won't be sold and will be publicly available.
Flow rate using weirs and flumes
From Transwiki
Flumes and weirs are designed to change a flow from sub-critical to super-critical. Many flumes cause this transition with a narrowing of the throat and a drop in the channel bottom. This transition causes flow to pass the critical depth. At the critical depth, there is a direct relationship between water depth, velocity and flow-rate
[edit] Weirs
Weirs give us a simple method of measuring the rate of fluid flow. Since the geometry of the top of the weir is known, and all water flows over the weir, the depth of water flowing over the weir indicates the amount of flow. Weir can be a simple metal plate with a V notch cut into it or it may be a concrete and steel structure across the bed of a river. A v-notch weir will give a more accurate indication of low flow rates. Flow rate (F) over a weir is equal to the height (H) to an exponent (e) times a constant(k).
F = kHe
Types of weirs:
- Sharp Crest Weir - commonly used for irrigation flow measurement.
- Broad Crest Weir
- Crump Weir (named after the designer)
- Needle dam
[edit] Flumes
A venturi flume has a special shaped open channel flow section which may be installed in a ditch ,canal, or lateral to measure the flow rate. The Parshall flume is a particular form of venturi flume.
Types of flumes:
- Parshall
- Palmer-Bowlus
- Trapezoidal
- HS/H/HL-Type
- Cutthroat
- RBC
- Montana
- SANIIRI
[edit] Open Channel
The Open Channel method of flow rate measurement uses the height or head of the liquid as it passes over an obstruction in the channel.
Other flow rate techniques involve square root extraction
Extracting flow rates from weirs and flumes requires a exponential function which can be found in panel meters
